EN  | IT  | FR  | DE

OnlyOne QuickSpin INOX PRO 45
OnlyOne QuickSpin Fitness Poles for Pole Dance

OnlyOne QuickSpin PRO 45 Inox Hydro
Suitable for pole dance pros and beginners, gym equipment, competitions
FINISHES
 mirror-polished stainless steel
HEIGHT

customized, max.420 cm

DIAMETER
45 mm
APPLICATION

Static & Spinning with QuickSpin

ASSEMBLY
under pressure, without drilling
POLE&SILK
ARRANGEMENT
yes

Pressure installation of the OnlyOne Pole

MADE-TO-MEASURE, SAFE AND DISMANTLABLE POLE DANCE POLES

The OnlyOne QuickSpin PRO 45 Inox fitness poles for pole dance designed and made in Italy by The Pole are easy to install, safe to practice on and beautiful to look at.

The pole can be installed either with screws (on the floor and ceiling) or by pressure, according to requirements.
The exclusive pressure system allows the installation of the pole even by one person, and, thanks to the Safety Plate and Center Pad accessories, the pole can be installed and uninstalled faster and be even safer. The pressure Installation can be done by one person alone.

Fitted with the brand-new QuickSpin Torx system: This is the most rapid fitting system in the world. A locking/unlocking system which allows for switching the pole from static to spin and vice-versa with a simple gesture, without the use of keys or other equipment.

 

 Already used by the best performers worldwide, thanks to their extraordinary features and high-quality materials, these fitness poles for pole dance guarantee supreme durability and reliability.

Fitness Poles  Best Dance Poles  Pole Dancing & Fitness

MADE-TO-MEASURE POLE DANCE POLES

The OnlyOne QuickSpin PRO 45 INOX pole is cut to measure in accordance with the height of your ceiling and is suitable for ceiling heights of between 320 cm and 420 cm.

The pole is made up of just two parts connected by a single joint, hence the name OnlyOne. This characteristic provides numerous advantages from a structural point of view and means that little time is required for set-up. 

While the lower part of the pole is 200 cm in length, the upper section is cut to measure in accordance with the height of your ceiling and can be replaced with a section of a different length, allowing the pole to be installed in different locations. 

Click here: Replacement upper section for the OnlyOne pole

Fitness Poles inox finishes

100% STAINLESS STEEL

The OnlyOne QuickSpin PRO 45 INOX pole is made of 100% stainless steel and is available with a diameter of 45 mm.

It offers a grip which lies mid-way between standard chromed poles and poles with GeckoGrip finish.

It is ideal for those used to carrying out moves that include frequent drops, and for those preparing for performances or competitions.

The INOX pole is hand-polished to a mirror finish. It is beautiful to see and safe to use. As it is made entirely from stainless steel, there is no risk of flaking and causing cuts, unlike chrome poles.

The OnlyOne QuickSpin PRO 45 INOX pole, like chrome poles but unlike GeckoGrip poles, contains nickel, and it is therefore important to check personal compatibility.

Presenting Torx: the new QuickSpin

After more than five years of extraordinary performance from the QuickSpin system, the first system in the world for switching between spinning / static poles even with just one foot, we have once again produced a first: QuickSpin Torx.


REDUCTION OF PARTS: 
the design of the new QuickSpin Torx has eliminated all additional components: the system is now composed of only two pieces. This is the most rapid fitting system in the world.

ECO-SUSTAINABLE MATERIALS: ithe new QuickSpin Torx is made of aerospace aluminium. A technologically advanced and 100%-recyclable alloy.

HI-TECH CONSTRUCTION:  the new QuickSpin Torx is made entirely on CNC machines from a single block of aeronautical aluminium.

MAXIMUM RESISTANCE: Thanks to the increased contact areas, QuickSpin Torx can resist forces of more than 51 times those of the previous model.

ADAPTABILITY TO UNEVEN SURFACES:  the special connection profile allows the system to operate even with slight misalignments between bases.

UNPARALLELED RELIABILITY: the functioning of the QuickSpin Torx does not require springs or gears, and is therefore guaranteed for thousands of cycles, even if used under pressure.

QUICKSPIN TORXthe first system in the world allowing you to change the modality of your pole without stopping, now even better.

Fitness Poles Pole Dancing & Fitness

Advantages

The OnlyOne QuickSpin PRO 45 INOX spinning pole offers numerous advantages:

 

ADAPTABLE TO VARIOUS HEIGHTS by simply substituting the upper part of the pole.

COMPATIBLE with the Safety Plate and Centre Pad accessories, which render installation quicker and make the pole even safer to use.

100% STAINLESS STEEL COATING: unlike chromed poles, the coating does not wear with use and there is no risk of flaking, which can cause cuts and become dangerous

QUICKSPIN TORX SYSTEM: allowing the pole to be switched from spinning to static with a click.

PRESSURE INSTALLATION: the pole can be installed and removed various times a day, in just a few seconds, even by one person alone, as installation takes place from below, and therefore no special tools or ladders are needed.

CAN ALSO BE SCREW FIXED: thanks to the holes on the plates.

INTERNAL REINFORCED JOINT: made in aerospace aluminium to guarantee the utmost stability.

READY FOR POLE&SILK: a discipline which requires the pole to be used with aerial silks: just add the relative kit in order to be ready for everything!

CAN ALSO BE INSTALLED IN THE PRESENCE OF: sloping ceilings (thanks to the 3D Head accessory), cement beams or wood beams of minimum 11 cm in width (thanks to the Safety Plate accessory), IPE 180 beams (thanks to the corresponding IPE180 beam attachment).

100% MADE IN ITALY, guaranteeing the use of top-quality materials.

EN  | IT  | FR  | DE
EN  | IT  | FR  | DE

CUSTOMER CARE

+39 035.905116 from Monday to Friday, from 8.30 am to 12 pm and from 2 pm to 5.30 pm or info@thepole.it