3D Head: Ceiling Leveler
for quick and easy dance pole installation
Easy to install and made of high-quality components, the 3D Ball Joint for your dance pole guarantees high efficiency in every situation
QUICK AND EFFORTLESS DANCE POLE INSTALLATION
The 3D Head for ThePole pole dance poles,designed and created by ThePole, is made of aeronautical aluminum with CNC machining, is designed to be able to adapt to sloped ceilings or beams up to a maximum of 30 °. In case of installation under beams, the beam must be at least 10 cm wide.
The 3D articulated head consists of two pieces:
1) The head: has a diameter of 11 cm and is installed by screws M6 and rawlplug. The screws and rawlplug are not supplied because they must be chosen according to the composition of your ceiling or beam.
2) The pivot: it is equipped with a sphere and must be inserted in the upper part of the OnlyOne pole.
The pole with the pivot is installed by pressure inside the head, make sure that the contact surfaces support a pressure of about 350 kg.
If you change the installation room, the 3D head can also be used under straight ceilings parallel to the floor, but the head must always be screwed on.


3D head for sloped ceilings or beams
The 3D articulated head consists of two pieces:
1) The head: has a diameter of 11 cm and is installed by screws M6 and rawlplug (screws and rawplugs not included)
2) The pivot with the ball: must be inserted in the upper part of the OnlyOne pole.
The pole is installed inside the head with a pressure system to be able to remove the pole simply by turning it, leaving the head attached to the ceiling (make sure that the contact surfaces support a pressure of about 350 kg).
The screws for fixing the 3D Head are not supplied because they must be chosen according to the composition of your ceiling or beam.
The 3D Head is compatible with all OnlyOne poles and does not have the predisposition for the Pole & Silk.