POLE COATINGS AND DIAMETER
● ○ GeckoGrip 40 mm or 45 mm
● Inox 45 mm
OnlyOne Pole with 3D Head
the Pole Dance pole for sloped ceilings
OnlyOne QuickSpin 3D pole
Suitable for pole dancers of all levels both at home and for gyms/studios.
HEIGHT
Made to measure:
Maximum 420 cm for the 45 mm diameter pole. Maximum 320 cm for the 40 mm pole.
Maximum 420 cm for the 45 mm diameter pole. Maximum 320 cm for the 40 mm pole.
APPLICATION
Static & Spinning with QuickSpin
INSTALLATION OF THE 3D HEAD
exclusively with screws M6 and rawlplug (not included)
INSTALLATION OF THE POLE
for pressure or screw fitting
SET-UP POLE&SILK
no
THE POLE FOR SLOPED CEILINGS AND BEAMS BY THEPOLE
The OnlyOne QuickSpin 3D pole-dance pole has been designed and made to be installed beneath ceilings or beams with a maximum inclination of 30°. (Beams need to be at least 10 cm wide).
The pole has a ball joint head, known as a 3D head, which is made from aeronautical aluminium and which must be screwed to the ceiling, while the pole can be either screw or pressure fitted. If the pole is pressure fitted, the areas of contact must be able to support a pressure of approximately 350 kg.
The OnlyOne QuickSpin 3D pole is a professional pole and has been chosen to equip hundreds of studios and gyms world-wide. It is suited to all levels, and also for those looking to safely train at home, just like in the gym.
MADE-TO-MEASURE POLE
ADAPTABLE TO DIFFERENT HEIGHTS
The OnlyOne QuickSpin 3D pole is made to measure and is composed of two sections and just one internal reinforced joint in aeronautical aluminium.
The maximum length of the pole is 420 cm for the 45-mm diameter pole, and 320 cm for the 40-mm diameter pole.
The pole is composed of two sections of differing length according to the height of the ceiling: if the ceiling is less than 240 cm in height, the lower section of the pole will be 150 cm in length, and the upper section will be cut to measure according to the height of the ceiling. If the ceiling is more than 240.01 cm in height, the lower section of the pole will be 200 cm in length, and the upper section will be cut to measure according to the height of the ceiling. To adapt the pole to a new ceiling height, all you have to do is substitute the upper section with a spare section for OnlyOne poles.
This characteristic offers many structural advantages and renders assembly and fitting rapid and safe.
The pole has a tolerance of -1 cm/+4 cm with respect to the indicated height (e.g.: indicated ceiling height 325 cm, the pole will be suitable for heights of between 324 cm and 329 cm). Please make sure you have taken the measurements at the point in which the pole will be positioned.
If the ceiling is higher than 420 cm, please contact info@thepole.it for a made-to-measure product.
The maximum length of the pole is 420 cm for the 45-mm diameter pole, and 320 cm for the 40-mm diameter pole.
The pole is composed of two sections of differing length according to the height of the ceiling: if the ceiling is less than 240 cm in height, the lower section of the pole will be 150 cm in length, and the upper section will be cut to measure according to the height of the ceiling. If the ceiling is more than 240.01 cm in height, the lower section of the pole will be 200 cm in length, and the upper section will be cut to measure according to the height of the ceiling. To adapt the pole to a new ceiling height, all you have to do is substitute the upper section with a spare section for OnlyOne poles.
This characteristic offers many structural advantages and renders assembly and fitting rapid and safe.
The pole has a tolerance of -1 cm/+4 cm with respect to the indicated height (e.g.: indicated ceiling height 325 cm, the pole will be suitable for heights of between 324 cm and 329 cm). Please make sure you have taken the measurements at the point in which the pole will be positioned.
If the ceiling is higher than 420 cm, please contact info@thepole.it for a made-to-measure product.
The 3D ball-joint head
The 3D head is screwed to the ceiling with screws M6 and raw lplug. Screws and rawl plugs are not included with the product as they must be chosen according to the composition of the ceiling. The 3D head can also be fitted beneath inclined beams with a minimum width of 10 cm.
The pole is set up for both pressure fitting, inserting it into the 3D Head and allowing it to be fitted and removed, and for screw fitting, screwing the base to the floor for permanent installation.
Make sure that the ceiling does not have an inclination of more than 30°, that the contact surfaces can withstand a pressure of approximately 350 kg and that the pole is installed in the point at which measurements were taken when ordering.
The pole is set up for both pressure fitting, inserting it into the 3D Head and allowing it to be fitted and removed, and for screw fitting, screwing the base to the floor for permanent installation.
Make sure that the ceiling does not have an inclination of more than 30°, that the contact surfaces can withstand a pressure of approximately 350 kg and that the pole is installed in the point at which measurements were taken when ordering.
Fitted with the original QuickSpin system
The pole is fitted with the original QuickSpin system, the first system, designed by ThePole, that allows you to switch from spinning to static pole and vice-versa with just one click, even with your feet and in the midst of a performance, without the use of keys or other tools and with the utmost safety.
QuickSpin can also be locked into the spin or static position.
QuickSpin can also be locked into the spin or static position.
Pole coating
The Poles are available with two different coatings to be chosen according to need:
POLES WITH GECKOGRIP COATING:
available in glossy white or glossy black with a diameter of either 40 mm or 45 mm. The GeckoGrip coating is a manufacturing process that coats the ThePole poles - appropriately prepared steel tubes - with plastic molecules that have extraordinary characteristics:
NICKEL-FREE: does not contain nickel, and is therefore ideal for all pole dancers, allowing gyms to be able to guarantee their clients a risk-free experience.
EXCELLENT GRIP: thanks to its microformula, it guarantees extraordinary grip, allowing a reduction in the gripping force required by the adductor muscles and the tendons in the thumb.
SAFETY DURING USE: even if the surface of the pole becomes scratched over time, it will not present a risk to the skin, unlike classic chromed poles, which may flake.
DOES NOT STAIN: this special coating has been studied not to stain the hands, unlike other types of coating.
DOES NOT WEAR OUT WITH USE. Poles with the GeckoGrip coating can be cleaned with isopropyl alcohol. A small quantity of alcohol should be poured onto a soft cloth, not directly on the pole.
100% STAINLESS STEEL POLE:
The Pole is made of 100% stainless steel and is available with a diameter of 45 mm. It offers a grip which lies mid-way between standard chromed poles and poles with GeckoGrip finish. It is ideal for those who perform frequent drops and for those preparing for shows or competitions. The STAINLESS STEEL pole is hand-polished to a mirror finish. It is beautiful to see and safe to use. Made entirely from certified stainless steel, unlike chrome poles, there is no risk of the material flaking and posing a risk of cuts. The STAINLESS STEEL Pole, like chrome poles but unlike GeckoGrip poles, contains nickel, and it is therefore important to check personal compatibility. INOX stainless steel poles can be cleaned with water and ammonia.
The water and ammonia should be poured in a small quantity onto a cloth.
POLES WITH GECKOGRIP COATING:
available in glossy white or glossy black with a diameter of either 40 mm or 45 mm. The GeckoGrip coating is a manufacturing process that coats the ThePole poles - appropriately prepared steel tubes - with plastic molecules that have extraordinary characteristics:
NICKEL-FREE: does not contain nickel, and is therefore ideal for all pole dancers, allowing gyms to be able to guarantee their clients a risk-free experience.
EXCELLENT GRIP: thanks to its microformula, it guarantees extraordinary grip, allowing a reduction in the gripping force required by the adductor muscles and the tendons in the thumb.
SAFETY DURING USE: even if the surface of the pole becomes scratched over time, it will not present a risk to the skin, unlike classic chromed poles, which may flake.
DOES NOT STAIN: this special coating has been studied not to stain the hands, unlike other types of coating.
DOES NOT WEAR OUT WITH USE. Poles with the GeckoGrip coating can be cleaned with isopropyl alcohol. A small quantity of alcohol should be poured onto a soft cloth, not directly on the pole.
100% STAINLESS STEEL POLE:
The Pole is made of 100% stainless steel and is available with a diameter of 45 mm. It offers a grip which lies mid-way between standard chromed poles and poles with GeckoGrip finish. It is ideal for those who perform frequent drops and for those preparing for shows or competitions. The STAINLESS STEEL pole is hand-polished to a mirror finish. It is beautiful to see and safe to use. Made entirely from certified stainless steel, unlike chrome poles, there is no risk of the material flaking and posing a risk of cuts. The STAINLESS STEEL Pole, like chrome poles but unlike GeckoGrip poles, contains nickel, and it is therefore important to check personal compatibility. INOX stainless steel poles can be cleaned with water and ammonia.
The water and ammonia should be poured in a small quantity onto a cloth.
Advantages of the OnlyOne QuickSpin 3D pole
The OnlyOne QuickSpin 3D spinning pole offers numerous advantages:
ADAPTABLE TO VARIOUS HEIGHTS: simply substitute the upper part of the pole.
GECKOGRIP COATING: allergy-free, does not wear out with use, does not flake even if scratched, does not cause cuts or become dangerous, and does not stain hands. 100%
STAINLESS STEEL COATING: unlike standard chromed poles, the coating does not wear with use and there is no risk of flaking, which can cause cuts and become dangerous
QUICKSPIN TORX SYSTEM: allowing the pole to be switched from spin to static with a click.
PRESSURE INSTALLATION OPTION: The pole can be installed and removed various times a day, in just a few seconds, even by one person alone, as installation takes place from below, with no special tools or ladders needed.
CAN BE INSTALLED UNDER: concrete or wood sloped ceilings or beams with a minimum width of 10 cm.
100% MADE IN ITALY, guaranteeing the use of top-quality materials.
ADAPTABLE TO VARIOUS HEIGHTS: simply substitute the upper part of the pole.
GECKOGRIP COATING: allergy-free, does not wear out with use, does not flake even if scratched, does not cause cuts or become dangerous, and does not stain hands. 100%
STAINLESS STEEL COATING: unlike standard chromed poles, the coating does not wear with use and there is no risk of flaking, which can cause cuts and become dangerous
QUICKSPIN TORX SYSTEM: allowing the pole to be switched from spin to static with a click.
PRESSURE INSTALLATION OPTION: The pole can be installed and removed various times a day, in just a few seconds, even by one person alone, as installation takes place from below, with no special tools or ladders needed.
CAN BE INSTALLED UNDER: concrete or wood sloped ceilings or beams with a minimum width of 10 cm.
100% MADE IN ITALY, guaranteeing the use of top-quality materials.
