FINISHES
● mirror-polished 100% stainless steel
OnlyOne QuickSpin LOW 45 Inox
Fitness Poles for Pole Dance
OnlyOne QuickSpin LOW 45 Inox Hydro
Suitable for pole dance pros and beginners, competitions, gyms and studios
HEIGHT
customized, max. 240 cm
DIAMETER
45 mm
APPLICATION
Static & Spinning with QuickSpin
ASSEMBLY
pressure pole and/or with screws
POLE&SILK
ARRANGEMENT
ARRANGEMENT
yes
Pressure installation of the OnlyOne Pole
HAND-POLISHED MIRROR FINISH STAINLESS STEEL POLE DANCE POLE
The OnlyOne Quickspin LOW 45 Inox pole dancing pole is 100% stainless steel. Unlike chromed poles, the coating does not wear with use, as it is hand polished to a mirror finish, and this pole is created to be easy to assemble, safe to use and, why not, attractive to look at.
The pole can be installed either with screws (on the floor and ceiling) or by pressure, according to requirements.
The exclusive pressure system allows the installation of the pole even by one person, and, thanks to the Safety Plate and Center Pad accessories, the pole can be installed and uninstalled faster and be even safer. The pressure Installation can be done by one person alone.
The OnlyOne Quickspin2 LOW 45 pole is fitted with the brand new QuickSpin2 Torx system, which is the first locking/unlocking system which allows the pole to be switched from static to spin and vice versa in a click, with a simple gesture, which can even be done with your feet, without the use of keys or other tools.
Used by the best performers worldwide, thanks to its characteristics and the materials used, it is guaranteed to be reliable and long-lasting.
MADE-TO-MEASURE POLE DANCE POLES
The OnlyOne QuickSpin LOW 45 INOX pole is cut to measure in accordance with the height of your ceiling and is suitable for ceiling heights of up to 240 cm.
The pole is made up of just two parts connected by a single joint, hence the name OnlyOne.
This characteristic provides numerous advantages from a structural point of view and means that little time is required for set-up. While the lower part of the pole is 150 cm in length, the upper section is cut to measure in accordance with the height of your ceiling and can be replaced with a section of a different length, allowing the pole to be installed in different locations.
Click here: Replacement upper-section for the OnlyOne pole.
In the future, it will be possible to adapt this pole to ceilings of up to 368 cm in height.
100% STAINLESS STEEL
The OnlyOne QuickSpin LOW 45 INOX Pole is made of 100% stainless steel and is available with a diameter of 45 mm.
It offers a grip which lies mid-way between standard chromed poles and poles with GeckoGrip finish. It is ideal for those used to carrying out moves that include frequent drops, and for those preparing for performances or competitions.
The INOX pole is hand-polished to a mirror finish. It is beautiful to see and safe to use. As it is made entirely from stainless steel, there is no risk of the material flaking and causing cuts, unlike chrome poles.
The OnlyOne QuickSpin LOW 45 INOX Pole, like chrome poles but unlike GeckoGrip™ poles, contains nickel, and it is therefore important to check personal compatibility.
Presenting Torx: the new QuickSpin
After more than five years of extraordinary performance from the QuickSpin system, the first system in the world for switching between spinning and static poles, even with just one foot, we have once again produced a first: introducing QuickSpin Torx.
REDUCTION OF PARTS: this is the simplest fitting system in the world. The design of the new QuickSpin Torx has eliminated all additional components: the system is now composed of only two pieces.
ECO-SUSTAINABLE MATERIALS: the new QuickSpin Torx is made of aerospace aluminium. A technologically advanced and 100%-recyclable alloy.
HI-TECH CONSTRUCTION: the new QuickSpin Torx is made entirely on CNC machines from a single block of aeronautical aluminium.
MAXIMUM RESISTANCE: the contact area of QuickSpin Torx has been increased to be able to resist forces of more than 25 times those of the previous model.
ADAPTABILITY TO UNEVEN SURFACES: Adaptability to uneven surfaces: even in the presence of slight misalignments between surfaces, the special connection profile allows the system to function.
BAR-RAISING QUALITY: the functioning of the QuickSpin Torx is guaranteed for thousands of cycles, even if used under pressure, as it does not rely on springs or gears.
QUICKSPIN2 TORX: the first system in the world for changing your pole from spin to static without stopping, now even better.
Advantages
The OnlyOne QuickSpin INOX LOW 45 pole offers numerous advantages:
ADAPTABLE TO VARIOUS HEIGHTS by simply substituting the upper part of the pole.
COMPATIBLE with the Safety Plate and Centre Pad accessories, which render installation quicker and make the pole even safer to us.
100% STAINLESS STEEL COATING: unlike chromed poles, the coating does not wear with use and there is no risk of flaking, which can cause cuts and become dangerous
QUICKSPIN2 TORX SYSTEM allowing the pole to be switched from spinning to static with a click.
PRESSURE INSTALLATION: the pole can be installed and removed various times a day, in just a few seconds, even by one person alone, as installation takes place from below, and therefore no special tools or ladders are needed.
CAN ALSO BE INSTALLED IN THE PRESENCE OF: sloping ceilings (thanks to the 3D Head accessory), cement beams or wood beams of minimum 11 cm in width (thanks to the Safety Plate accessory), IPE 180 beams (thanks to the corresponding IPE180 beam attachment).
100% MADE IN ITALY, guaranteeing the use of top-quality materials.