+39 035.905116     +39 327.7870236
EN  | IT  | FR  | DE
035.905116
327.7870236

WhirlPole® Inox Evo


    You are here:  
  1. Home
  2. AERIAL DISCIPLINES
  3. WHIRLPOLE THEBASE
  4. WHIRLPOLE - THE BASE INOX
WhirlPole® Inox Evo
Suitable for home pole dancing, studios, dance schools and gyms
MATERIAL
● Inox: 100% stainless steel
POLE DIAMETER
45 mm
POLE LENGHT
300 cm: two pieces of 150 cm each
INSTALLATION
Attachment of the webbing to the ceiling
POLE USE
inclined by 45°, rotating and/or flying

WHIRLPOLE® EVO IN STAINLESS STEEL

The WhirlPole® is an innovative and spectacular pole, a registered trademark of THEPOLE by AgmDesign.it, synonymous with quality, innovation, and reliability in the Pole Dance and Aerial Arts sector.
The trademark is protected by national and international regulations, guaranteeing the authenticity and exclusivity of our products.


Already used by the world’s top performers, thanks to its features and materials, it ensures great reliability and long-lasting durability.

 

The WhirlPole® Inox Evo is 100% stainless steel and offers a grip that falls between common chrome poles and poles with a polished GeckoGrip™ finish. It is visually appealing and safe to use because it is made entirely of certified stainless steel with a diameter of 45 mm. Unlike traditional chrome poles, stainless steel does not wear out with use, and there is no risk of peeling that could cause sharp edges. It should be noted that, like chrome poles and unlike GeckoGrip™ poles, stainless steel poles contain nickel; therefore, it is important to check personal compatibility.

 

For using the WhirlPole® also as a Flying Pole at significant heights, we recommend the SuperGrip™ material (see: WhirlPole® SuperGrip™), which, thanks to its special rubberized coating, provides better grip for hands and legs, ensuring greater safety.

The WhirlPole® is equipped with a carabiner that allows the attachment of an Hand Loop, opening new choreographic possibilities and expanding creative potential in performances.

 

MADE IN ITALY WITH THE BEST QUALITY MATERIALS

The WhirlPole® Inox Evo is made with highest-quality materials and cutting-edge technologies, ensuring maximum strength, safety, and superior performance to meet the demands of the top professionals in the field.

 

The WhirlPole® Inox Evo consists of:

-Two stainless steel (inox) pole sections, each 150 cm long.

-A 325 cm long webbing with a breaking load of 23 kN, to be replaced periodically or in case of wear.

-The upper attachment to be inserted at the top of the pole.

-A central internal joint to allow the safety webbing to pass inside the pole.

-A ball to be inserted at the bottom of the pole.

 

A black hexagonal base to hold the ball, allowing the pole to perform moves inclined at approximately 45°.

The space required to use the inclined pole varies depending on the angle of inclination; consider a minimum radius equal to 3/4 of the pole length (for a 300 cm long pole, a radius of 225 cm should be allowed).

 

The part of the base in contact with the floor is coated with high-friction rubber to prevent slipping during use.

Attention: It is important that the contact area between the base and the floor is free of dirt, which could reduce grip and cause lateral slipping.

Aerial Poles - 100% Stainless Steel Poles

The installation of the WhirlPole® is done by attaching the rope emerging from the upper end of the pole to the ceiling using appropriate and secure supports, and by fitting the ball of the pole into the designated receptacle of the hexagonal base.

 

The transition from spinning pole to flying pole is achieved simply by shortening the rope until the pole is lifted and suspended in the air.

 

The WhirlPole® Inox Evo has a maximum length of 300 cm, consists of only two pieces each 150 cm long, and is available in a 45 mm diameter.

 

WARNING: For using the WhirlPole® also as a flying pole at significant heights, we recommend the SuperGrip™ material (see: WhirlPole® SuperGrip™), which, thanks to its special rubberized coating, provides better grip for hands and legs, ensuring greater safety.

Aerial Poles - Whirlpole thebase inox

100% STAINESS STEEL

The WhirlPole® Inox Evo pole is 100% stainless steel.

Stainless steel poles offer a grip that is between common chrome poles and poles with a GeckoGrip™ finish. They are ideal for those preparing for performances and for those accustomed to performing moves that involve frequent “drops,” as they do not retain heat and facilitate execution.

Polished to a mirror finish, they are visually appealing and safe to use: made entirely of certified stainless steel, there is no risk of the material peeling and consequently becoming sharp.

Please note that, like chrome poles and unlike GeckoGrip™ poles, stainless steel poles contain nickel; therefore, it is important to verify personal compatibility.

 
Aerial Poles - 100% Inox pole

Spinning Pole and Flying Pole

The WhirlPole® Inox Evo combines two uses in a single pole: spinning pole (rotating and inclined) and flying pole (suspended). The transition from spinning pole to flying pole is achieved simply by shortening the rope until the pole is lifted and suspended in the air.

 

For using the WhirlPole® Inox Evo also as a flying pole, especially at significant heights, we recommend the SuperGrip™ material (see: WhirlPole SuperGrip™) because, thanks to its rubberized coating, it provides greater grip and therefore enhanced safety.

Aerial Poles - 100% inox poles
Aerial Poles - 100% Stainless Steel Poles Whirlpole thebase inox

Advantages

The WhirlPole® Inox Evo is divisible into two parts and is therefore easily transportable by both plane and car.

Installation is simple and quick: just attach the pole’s rope to the ceiling using appropriate supports and insert the pole’s ball into the base.

The WhirlPole® Inox Evo pole is compatible with the Albatros accessory, a steel plate fixed to the ceiling with anchors that saves space and reduces the cost of a traditional swivel by allowing accessories to be attached directly to the provided safety ring.

EN  | IT  | FR  | DE
EN  | IT  | FR  | DE

CUSTOMER CARE

+39 035.905116 from Monday to Friday, from 8.30 am to 12 pm and from 2 pm to 5.30 pm or info@thepole.it