The WhirlPole® SuperGrip™ Evo is made with top-quality materials and cutting-edge technologies, ensuring maximum strength, safety, and superior performance to meet the needs of the most demanding professionals in the industry.
The WhirlPole® SuperGrip™ Evo consists of:
-Two pole sections, each 150 cm long, with SuperGrip™ (previously known as UltraGrip3) coating.-A 325 cm-long webbing strap with a breaking load of 23 kN, which must be replaced periodically or in case of wear.
-The upper attachment to be inserted at the top of the pole.
-A central internal joint to allow the safety strap to pass inside the pole.
-A ball to be inserted at the bottom of the pole.
-A black hexagonal base designed to house the ball, allowing movements with the pole inclined at approximately 45°.
The space required to use the pole in the inclined position varies depending on the inclination angle; we recommend considering a minimum radius equal to ¾ of the total pole length (for a 300 cm pole, a radius of at least 225 cm is required).
The part of the base in contact with the floor is covered with high-friction rubber, which prevents it from slipping during use.
Warning: it is essential that the contact area with the base remains clean and free from dirt, as any debris may reduce grip and cause lateral slipping.










